![]() |
ITEL S13 |
Itel S13 is one of the most recently released Itel S series Android smartphones running on Android OS 8.1 Go edition. The S13 appears to be the successor of the Itel S12 model, with both having a similar battery capacity, processor speed, and RAM. In this article we are going to provide you with a direct download link for the official stock firmare of this device. We have also made a how to flash guide and some precaution available.
CHECK ALSO:
DOWNLOAD ITEL S11 STOCK FIRMWARE
SOME KEY SPECIFICATIONS OF ITEL S13
The Itel S13 comes with these following core specifications;
- 2G Network: GSM: 850/ 900/ 1800/ 1900 MHz
- 3G Network: WCDMA: 2100 MHz (900/1700/1900/2100 MHz)
- 4G Network: NO
- SIM: Dual Micro SIM (Dual Standby)
- Keyboard: Touchscreen
- Colors: Champagne Gold, Bordeaux Red and Black colors
- Type: LCD IPS, multi-touch touchscreen with 16m colors
- Size: 5.5 inches, 480 x 960 pixels, 282 Pixels Per-square Inch
- Card slot: MicroSD, up to 32GB
- Internal: 8GB
- OS: Android 8.1 Oreo with Android Go
- Processors: Quad-core 1.3 GHz Cortex A7 CPU
- CPU: Mediatek MT6580 chipset - Mali GPU
- RAM: 1GB RAM
- Alert types: Vibration, MIDI, MP3 ringtones
- Loudspeaker: Yes, Mono loud speaker
- Audio port: 3.5mm jack
- 2G: GPRS up to 85.6 kbps; EDGE รข€“ up to 236.8 kbps
- 3G: Up to 42.2 mbps downlink; Up to 11.5 mbps uplink
- 4G: NO
- WIFI: Wi-Fi 802.11 b/g/n, Wi-Fi hotspot, Wi-Fi direct
- Bluetooth: Version 4.0, A2DP
- GPS: A-GPS
- NFC: NO
- USB: micro-USB 2.0
- Primary Camera: 5 MP + 5MP dual rear cameras, autofocus, single-LED flash
- Camera Features: Geo-tagging, touch focus, face detection, panorama, auto-HDR
- Video: 1080p@30fps
- Secondary: 13MP Camera with LED flash
- Capacity: 2,400 mAh Li-Ion battery
- Stand-by: Up to 25 hours
FLASHING REQUIREMENTS
Just like any other MTK device, Itel S13 Android smartphone with chipset MT6580 can be flashed when you must have gathered these follow tools/files;
- Android MTK USBVCOM drivers
- Android MTK Flash tool like sp flash tool, Miracle box, nck Android mtk, CM2 MTK, etc.
- A USB cable
- A Computer
- And of course the firmware file
- Winrar to extract the archive files.
NOTE THIS BEFORE YOU FLASH
[*] Flashing will erase all your personal data
[*] To avoid any data loss, make sure to copy your personal data before flashing
[*] Always make a complete backup of your current system before flashing a new one.
[*] For your device to communicate with the flash tool, you must have properly installed usb drivers.
[*] Although firmware file is tested and found to be working, we don not guarantee you 100% success with this file, so flash it at your own risk.
HOW TO FLASH
- Download and extract drivers, flash tool and firmware files.
- Install drivers and restart your computer.
- Launch flash tool and load firmware scatter files
- Power off your device and remove battery then reinsert, or simply remove and reinsert if phone is on bootloop or deadboot.
- Hit "Download/start" button on flash tool, connect phone to PC and wait for it to complete the flashing process.
- [*] SEE FULL GUIDE HERE
Comments