Download Touching T6 firmware file 100% working

Download from this page, the stock firmware/rom for your Touching T6 Android MTK smartphone. With this firmware file, you can remove pattern lock, fix bootloop error, and dead boot. The firmware file is a backup from NCK Dongle and is in the normal scatter.txt format.

So, if you have been looking for the stock firmware of Touching T6, then you just came at the right place. Download the firmware file from the link below, follow flashing guide and get your device fixed.

Touching T6 boot info

 CPU: MT6572 SW:0000 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x00E9000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x20000000
  Reading infr(EMMC)...
  WIFI MAC:0010553E447D

Prerequisite to flash Touching T6

The flashing of MTK Android phones can be done using different MTK Tools. The tool to use is dependent on the firmware format. For this Touching T6 stock firmware backup, the following tools/files will be needed;
  1. Android MTK drivers installed on your computer
  2. SP Flash tool or NCK Android MTK Dongle
  3. A USB cable
  4. Make sure the battery is charged to at least 30%.

How to flash

  1. Power off the phone, remove and reinsert the battery,
  2. Download and extract firmware for your build from the link below,
  3. Download sp flash tool and launch, then load firmware from the directory you extracted,
  4. Once the firmware is loaded, click the download button and connect the phone to PC via USB;
  5. Wait for flashing to complete
  6. Check full guide here.

Download Touching T6 firmware